Slab Heavy Duty Formwork
Model Number: HX169
surface: painting or galvanzied
Quick, comfortable and easy assembly
Ensured workers safety
Long-lasting heavy-duty design
Two typesof main beams and two system variants, both compatible:
RAPID 0.67 m: props and plywood supports each 0.67 m.
RAPID 1 m: plywood supports located each 1 m; props each 1 m or 0.5 m, depending on requirements.
Formwork support with shoring or prop.
90º assembly: different geometries depending on grid width and change of grid direction possible.
Easy solutions for infillings on column and wall, drop beams and for perimeter areas.
Steady board fitted in steel structure, no nailing.
Collective protection: Perimeter and openings protection with handrails and nets under formwork to prevent falls from height.
Quick, comfortable and easy assembly.
The steel grid can be assembled previously to the placing of the plywood.
Ensured workers safety. Also when placing slab lightenings and steel reinforcement.
For erection, only hammer required.
Long-lasting heavy-duty design. Highly resistant steel structure with epoxy paint coating.
Main beams and props (or shoring) make up the load-bearing structure of the system. The recoverable material can be retrieved
No re-propping or prop moving until complete falsework removal.
Trolleys or mobile towers for erection can be easily moved (2 m distance between props).
Net under formwork: collective protection certified by the Spanish Technological Institute of Construction AIDICO.
Slab Heavy Duty Formwork Images